Hello networkers,
Cisco CSR 1000v router added to online lab
This is a virtual router – with the latest version 15.4(3)
Router info – Cisco
You can access the router at-
www.sharontools.com/online-lab
Feel free to do changes 🙂
Sharon
Hello networkers,
Cisco CSR 1000v router added to online lab
This is a virtual router – with the latest version 15.4(3)
Router info – Cisco
You can access the router at-
www.sharontools.com/online-lab
Feel free to do changes 🙂
Sharon
Awesome! Thanks a million. Free access to online lab that’s unbelievable. Thank a million sharon.
I would like to thank sharon saadon for this wonderful lab. keep up your buddy!
I am not able to login , can some one help me. Thank you.
Logs:
Please enter your choice: 1
nexus1000v-1 Password: ******
Password OK
Using username “admin”.
Nexus 1000v Switch
Access denied
Using keyboard-interactive authentication.
Password:
Now it’s OK
What is the password for Cisco router R3
Thank you very much for this site. I’ve been using it for my Juniper certifications and it worked fantastic.
Now I am trying to login into the Cisco nexus1000v and, well, I am unable to do it. Any help would be appreciated. I mean, is it me or there is any problem?
Again, thanks for this wonderful site.
Thanks,
Now it’s OK
hi looking for password to test juniper thank you
I just joined the site. Amazing you offer these labs online free. Just what I needed to to get off the ground with my studies. Trying to get into the CSR1000v but no dice. I enter the pass exactly and and it keeps saying Wrong Password. Am I missing something?
It’s working,
Mybe there was a problem that day..
Terminal server – SharonTools
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# Device Name Users Comments
=== ============= ======= ==========
1. nexus1000v-1 0
2. nexus1000v-3 0
3. esxi-5.1 0
4. VC-appliance 0 [ Disabled ]
9. CSR1000v 0
11. cisco-r1 0
12. cisco-r2 0
13. cisco-r3 0
14. cisco-r4 0
15. cisco-r5 0
16. cisco-r6 0
21. juniper1 0
22. juniper2 1
23. juniper3 0
51. debian64 0
101. alteon 0
0. Exit
999. Users access history (Last 20) ** NEW **
Please enter your choice: 9
CSR1000v Password: ******
Password OK
CSR1Kv#
What is the password for Cisco router R3
Cancel my last comment. Thank you!!
Hi sharon could you please let me know which command is supported on Cisco CSR 1000V
Clear crypto sa peer or clear crypto ipsec sa peer
You can try at the lab..
Hi Guys I am new to this Lab environment, how to connect routers to configure OSPF and other protocols, I mean login diffrerent routers simultaneously,Please help me out.
But this environment looks awesome,Sucha wonderful job.
You can do it with webconnect (each device at a different tab,
or with multiply DOS / PuTTY windows
I can’t access the Cisco routers after I enter the password, what is the password?
999. Users access history (Last 20) ** NEW **
Please enter your choice: 9
CSR1000v Password: ******
Wrong password
* Password is changing every 1 hour
Get a valid password from-
http://www.sharontools.com/online-lab
It’s free 🙂
Press any key to continue..
Mybe someone changed the password,
Device configuration (and password) is reset every 24 hours
in labs what we need to configure
Whatever you want..
What is the password for juniper1
Hey Sharon,
The link to the lab console seem to be down. Both telnet and web terminal are unable to connect to lab.sharontools.com for port 23 or 8080. Can you please take a look at it when you get a chance. I believe you said nagios is supposed to spot and fix this.
Thanks again for the cools setup it really helps out a lot.
Best Regards,
Ed
I second that emotion!
It’s great, hope it gets up and going again.
thanks
Hi Sharon.
Can you help me please, I can’t use the Lab.
It does not allow me to connect through port 22,23 and 25
thanks for your help
Really great help for learners for providing the free online Lab, Sharon could you please help me to learn the Nexus 1000V lab guide.
I need password login : juniper, cisco
I need connect to Lab cisco and juniper, but i can’t access password. Pls help me !
As some others, I am looking to access the lab to test some route-maps and redistribution. Any help appreciated!!