Useful commands for Nexus (7000, 5000, 2000) switches
Category Archives: Tips
Juniper EX switches configuration examples
Very useful commands for juniper EX switches
How to configure Interfaces, OSPF, Voip, LLDP, QOS, Access lists, Routes
and more
How to view fiber channel neighbors in cisco nexus
When you connecting switches with FC ports (fiber channel connection for SAN environment)
you can’t use the ‘show cdp neighbors’ command to view connected switches
but you can use ”show topology” command
Cisco nexus enable all ports script
When configuring Cisco Nexus 7000 with VDC,
Sometimes you need to enable (no shut) all the interfaces in each VDC,
The problem is that in each VDC there are alot of interfaces,
And there is alot of work to enable them,
So, you can use this script to do that:(under ‘conf t’)
Nortel (Avaya) 8600 tips
Few tips to help with Nortel (Avaya) ERS 8600
SecureCRT paste script
A small script to paste script / commands to SecureCRT
Very helpful if needed to paste alot of lines to network devices
With normal paste not all the characters paste if there are alot of lines